Are there water stains that run down your walls or extend across your ceilings? This is probably due to a roof leak. The hard part here is how to track down the leaking roof, but fixing it is quite simple. This article will show you some easy tricks on how you can find and repair some of the most common types of roof leaks.
Once you found out that you have a leaky roof, you need to have it fixed as soon as possible, even if you’ll be getting a new roof the following year or it doesn’t bother you that much. Even for a short time, big problems may occur from just a simple leak such as damaged ceilings, destroyed insulation, and rotted framing and sheathing. Take for example the 2-year old ceiling stains with flashing leaks which caused the homeowner a very expensive repair bill. If only did he or she dealt with the matter immediately, then the damage and its subsequent repairs would have been minimized.
Where is the Roof Leak?
When looking for a roof leak, it is best to start at the roof uphill part from the stains. Search for any items that may have penetrated the roof, the most common source of leaks. Such penetrations may include one or more of the following: chimneys, plumbing and roof vents, dormers or other stuff that projects through the roof. They can be anywhere to the right or left or above the leak.
And if you have access to the attic, the easiest way to find the leak is to go to the area with a flashlight and search for a proof. You can identify it by looking for a water stain, mold, or black marks. If none or what you have is a vaulted ceiling, you need to go up into the roof to verify.
What’s the Solution for a Leaking Roof?
A small leak is often caused by unstable shiner, a nail that missed the proper framing. For this matter, you can use a side-cutting plier to clip the nail. As for the bigger issue like roof vent, plumbing vent boots, and step flashing, you can apply the suggested fixes below:
For Fixing Roof Vents
Check for broken seams on metals or for cracked housings on plastic roof vents. To throw caulk can only fix it temporarily. The best solution is still to replace the damaged vents. Using rubber-washer screws is also highly recommended.
For Fixing Plumbing Vent Boots
Plumbing vent boots can be made of plastic and metal, all plastic, or even two-piece metal units.
Check metal bases for broken seams and plastic bases for cracks. Next is to examine the pipe’s rubber boot surrounding. If there’s a torn or it is rotten, it is probably the cause why the water has worked its way into the house along the pipe. For this matter, replace the old vent boot and buy a new one. But if only the base nails are pulled or missing and the boot is still in good condition, you can simply replace them with the rubber-washer screws used for metal roofing systems.
For Fixing Step Flashing
Step flashing is used along walls that intersect the roof. Every flashing channels’ short section water over the shingle downhill from it. But if a piece comes loose or the flashing rusts through, water will run right behind it, and into the house. Replacement is needed for a rusted flashing. This means that there is a need to remove the shingles, pry the loose siding, and then the step flashing removal and replacement.
To conclude, a roof leak is not that hard to stop and it doesn’t require related experience provided that you do your own study by asking someone who has done it or by online research. With the above tips about tracking down and fixing the most common types of roof leaks, it will only take you some time to mark the job done.